-M-138-CMC
Uus toode
Veel 1930-ndatel ei tootnud legendaarne Alfa Romeo veel ise oma autode keresid vaid osteti sisse. Konkreetse mudeli 6C 1750 GS puhul telliti kered vankritootjalt Zagato. See osutus heaks valikuks kuna Zagato oli kerede tootmises väga loominguline ja osav.
Laost otsas
Hoiatus: Viimane toode laos
Saadaval alates:
Veel 1930-ndatel ei tootnud legendaarne Alfa Romeo veel ise oma autode keresid vaid osteti sisse. Konkreetse mudeli 6C 1750 GS puhul telliti kered vankritootjalt Zagato. See osutus heaks valikuks kuna Zagato oli kerede tootmises väga loominguline ja osav.
The four-meter-long car had two spare wheels that were stowed in a rear well. In the event of bad weather, a textile top offered emergency cover or protection against rain. A striking feature of this car was the removable red plastic covers on the three headlights, which were intended to improve the aerodynamics of the vehicle.
The 1750 GS was powered by a 6-cylinder in-line engine that Vitorio Jano, the brilliant chief engineer of Alfa Romeo, had developed. It generated a remarkable 85 hp at 4500 rpm. Several factory race cars had their cylinder heads welded (testa fissa) so that they could rev up to 5000 rpm, yielding a magnificent output of 102 hp. Whether equipped with 85 or 102 hp, the Gran Sport excelled.
Owing to a low total weight of 920 kg and a reduced wheelbase of 2745 mm that improved its handling dramadically, the Gran Sport became the most famous Alfa Romeo of the time. Numerous important victories all over Europe, as in the 1930 and 1931 Mille Miglia and the wet race of the Irish Tourist Trophy -- to name just a few -- made it the undisputed dominator of that racing era. Only the rigorous endurance race of the 24 Hours of Le Mans proved to be too much for the 6C 1750 GS.
• Two-seater Spyder with a Zagato light-alloy body
• Steel box frame
• 6-cylinder in-line engine with dual overhead camshafts
• Crankcase and cylinder heads made of light alloy
• Four speed gearbox with an open gear lever gate
• Front and rear rigid axle with leaf springs and friction damper
Mudeli tüüp | Klassika |
Mõõtkava | 1:18 |
Maximum output | 85 hp at 4,500 rpm/ 102 hp at 5,000 rpm (factory race cars 1930) |
Displacement | 1,752 cc |
Bore x stroke | 65 x 88 mm |
Wheelbase | 2,745 mm |
Track front/rear | 1,380 / 1,380 mm |
Mixture preparation | Roots supercharger with Memini dual flat-flow carburetor |
Total weight | 920 Kg (85 hp)/ 840 Kg (102 hp, factory race cars 1930) |
Top Speed | 145 Km/hr (85 hp), approx. 170 Km/hr (102 hp) |